Accessories - Hoover H-FREE 500 Hydro Plus Manuel D'utilisation

FRONT WIPER BLADE FIXING
To obtain the best crevice and carpet performance, it is recommended to fix the front wiper blades vertical and don't turn
forward and backward during using.
1. Detach the Hybrid Care roller release flap and remove it. [5a]
2. Push down the nozzle front wiper fixing button. [5b]
3. Re-fit the Hybrid Care roller in position. [5c]
STORAGE FUNCTION
After use, your cleaner has 2 convenient storage methods.
1. WALL MOUNT STORAGE
Your product is supplied with a wall mount for convenient easy storage. Using the screws provided, fix the Wall mount to
your wall. After product use, simply place your cleaner into location. [2]
2. COMPACT STORAGE/PARKING MODE
To store the product on the tube, remove the handheld unit by pressing the handheld release button. [8]
Ensure the integrated 2in1 tool is returned to its original position as supplied ensuring the tool is located fully home with
the dusting brush and locating hook in the downward position.
Assemble the locating hook into the lower slot on the tube, and push the rear handle fully home into the locking mechanism
located at the top of the tube. [9]
SAFETY PROTECTION SYSTEM
To ensure the reliability of the product is not affected if used under arduous conditions, the product features two integrated
safety protection systems. One on the cleaner and one on the nozzle.
NOTE: The Safety protection system will action in two conditions:
1. If there are obstructions in the air inlet or in the tube, the cleaner will be protected and turn OFF, and the LED light on
the main unit turns to red. If this happens simply check if there are any obstructions in the tube or in the air inlet of the
handheld. Remove it and switch ON again.
2. If the agitator has a blockage or is locked, once actioned, the agitator will stop rotating and the WHITE LED light on the
nozzle will turn to RED. [17] If this happens, simply turn off your product and clear the agitator obstruction. To resume
cleaning, press the on/off button and the product will start working again.
BATTERY
This cleaner is equipped with a battery status LED Light. When the product is ON, the LED light illuminates in two colors
to show the battery level:
BATTERY LEVEL:
White color: charge
Red color blinking: charge
There are 2 methods of charging:
Charge the battery when fitted to the product.
Insert the battery charger jack to the battery. The LED status indicator will illuminate RED when charging. When charging
is complete, the LED status indicator will illuminate WHITE for 1 min then switch off. [10]
Charge the battery when removed from the product.
Remove the battery from the product by pressing the battery release button.
Insert the battery charger jack to the battery. The battery pack LED will illuminate RED when charging. Once charging is
complete, the LED indicator will illuminate WHITE. [11]
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.

ACCESSORIES

CREVICE TOOL INTEGRATED ON THE HANDHELD, CREVICE TOOL INTEGRATED ON THE TUBE, 2IN1 FURNITURE
TOOL& DUSTING BRUSH, LONG CREVICE TOOL*, MINI POWER NOZZLE* AND DUST BIN CLEANING TOOL*.
Integrated Crevice Tools - Ideal for accessing tight spaces.
Integrated Dusting Brush - Ideal for cleaning surfaces without damaging or scratching.
5
GB