Steam Ironing; Dry Ironing; Shock Steam - Beko BKK 2304 Manuel D'utilisation

4 Operation of the Appliance
•
In order to learn the ironing tem-
perature to be used, check the
garment's care label.
•
When the thermostat warning
light (2) turns off, your iron will
have reached the desired tem-
perature.
•
If you don't know the fabric of
your garment, first iron an invis-
ible part of your garment and
determine a correct ironing tem-
perature for it.
•
In order to prevent the bright
stains that may form on the syn-
thetic fabrics such as silk, iron on
the reverse side of the fabric. Do
not use the spray feature in order
to prevent the stain formation.

4.3 Steam ironing

•
Pull the steam setting knob (7)
to the right or left and bring it to
steam level "1-2" as you desire.
Iron / User Manual

4.4 Dry ironing

•
In order to make dry ironing, you
should bring the steam setting
knob (7) to "0" (off) position.
Having water in the iron would
be advantageous; you may use
the water spray button (9) when
necessary.

4.5 Shock steam

•
During ironing, in order to remove
the tenacious creases, you can
gain strong steam by pressing on
the shock steam button (8) for
3-4 times in 5-second intervals.
•
When you start to iron, shock
steam may not emit in your first
couple of presses. In order to gain
shock steam, the temperature
setting dial (3) should be at •• or
a higher level.
•
You can open the creased parts
of the garments with the steam
power which is obtained by press-
ing the shock steam button (8)
during steam ironing. However if
this process is maintained without
an interruption, water may also
come from the soleplate (4) along
with the steam.
17 / 94 EN