gourmetmaxx CM-111A Mode D'emploi page 15

Masquer les pouces Voir aussi pour CM-111A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Make sure that the mains cord does not get pinched, kinked or
laid over sharp edges and does not come into contact with hot
surfaces.
Do not overfi ll the water tank to prevent the thermo cup from
overfl owing later on! Always fi ll the water tank with an amount
of water that the cup (thermo cup etc.) located under the coffee
spout is capable of holding!
Do not use the coffee maker without water.
Do not place the coffee maker or thermo cup on the plates (e.g.
of other coffee makers), stoves, ovens etc. to prevent damage.
Only use accessories included in the product contents or exclu-
sively those recommended by the manufacturer.
Do not place the device under cupboards or similar. It could be
damage by rising steam!
Do not move the device during the brewing process.
Maintain adequate distance to heat sources such as stoves or
ovens to prevent damage to the device. Do not place any open
fl ames, e.g. burning candles, in the direct vicinity of the device,
cord and plug.
Do not allow the device to fall and do not subject it to strong
percussions.
Do not pull or carry the device by the cable.
Do not subject the device to extreme temperatures, severe
changes in temperature, moisture, wetness or direct sunlight.
Do not use any corrosive or abrasive cleaning agents to clean
the device. They could damage the surface.
Hygienic notes
The device and thermo cup may have residues from production.
To avoid health risks, clean the device and thermo cup thor-
oughly before fi rst use. When cleaning, please be absolutely
sure to follow the cleaning notes in the chapter "Cleaning and
decalcifying".
Only use fresh drinking water at room temperature for brewing cof-
fee. Do not use any water from a bath tub, sink or other containers.
Keep the device clean.
15
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Z 09871

Table des Matières