Publicité
4.
Install the Lavatory
Caulk
Mastic
Sellador
Install the faucet to the lavatory according to the faucet manufacturer's
instructions.
NOTICE: Risk of product damage. Siliconized acrylic caulk must be used to secure
the lavatory to the vanity. Do not use 100% silicone sealant, which will damage the
finish of the vanity.
NOTICE: Do not allow caulk to come in contact with the drawer slides and carriage.
Apply a thin, continuous bead of siliconized acrylic caulk around the entire top
edge of the vanity.
CAUTION: Risk of personal injury. The lavatory is very heavy. Get help lifting
the lavatory into place.
Center the lavatory from side-to-side on the vanity.
Wipe away excess caulk from the edges and any caulk that may have come into
contact with the drawer slides and carriage.
Allow the caulk to cure for at least eight hours.
Connect all plumbing and drain lines. Check for leaks.
Installation du lavabo
Installer le robinet sur le lavabo conformément aux instructions du fabricant du
robinet.
NOTICE: Risque d'endommagement du produit. Mastic à l'acrylique siliconéedoit
être utilisé pour sécuriser le lavabo au meuble. Ne pas utiliser de mastic à la silicone
à 100 %, car cela endommagera la finition du meuble.
NOTICE: Ne pas laisser le mastic entrer en contact avec les glissières et le chariot des
tiroirs.
Appliquer un lit fin et continu de mastic acrylique siliconé autour du rebord
supérieur complet du meuble.
Kohler Co.
11
1106944-2-B
Publicité
