Names And Functions Of Parts (Remote Control) - Teac NT-503DAB Mode D'emploi

Names and functions of parts (remote control)

a
b
c
d
e
f
When the main unit and the remote control both have buttons
with the same functions, this manual explains how to use one of
the buttons. The other corresponding button can be used in the
same manner.
14
a
STANDBY/ON button
Press to put the unit into standby mode or turn it on.
g
b
INPUT buttons
Use to select the playback source.
o The USB button selects the rear USB port.
o Use the TUNER button to show DAB. (Press the ENTER but-
ton to enter DAB mode.)
c
UPCONVERT button
h
Use to change the upconversion setting.
i
d
FILTER button
Use to change the filter setting.
j
This changes the filter according to the input (PCM or DSD).
e
Up/down (k/j) buttons
k
Use to select setting items.
f
MUTE button
Press to mute the sound temporarily.
g
DIMMER button
Use to adjust the brightness of the main unit's display.
h
INFO, PROGRAM and CLEAR buttons
Use these buttons when in DAB mode.
INFO button
Use to change the text shown on the bottom line of the display
(page 26).
PROGRAM button
Use to set presets (page 28).
CLEAR button
Use to close the DAB menu.
i
MENU button
Press to enter setting mode (page 19).
Press when in setting mode to return to the previous screen.
j
ENTER button
Press to confirm the selected item.
k
VOLUME (+/−) buttons
Use these buttons to adjust the volume.