Recall Memory; Clear The Saved Data; Instrument Setup Menu - VIO OXY 70 Manuel D'utilisation

Confirm with and return to measure mode.
•
to save the value. The number next to the M+ icon indicates how much data has been
• Press
saved for that parameter.
Note: Manual or automatic saving of a value is confirmed by a sequence of flashes of the green LED.

• Recall Memory

In measure mode in the parameter of interest, press key
•
The last saved data is shown on the display.
• As indicated by the string
The number next to the M+ icon indicates the save slot.
• Press to return to measure mode.

• Clear the saved data

• To clear the data stored in the instrumental memory, access the CLEAR DATA P8.2 setup menu and
select YES.
IMPORTANT: Factory reset of the DO setting parameter does not delete the stored data

Instrument Setup menu

• In measure mode, press key
Use the directional keys to move to SETTINGS P9.0 and access the menu by pressing the key
•
• Move with the keys
The table below shows the setup menu structure for the general settings of the instrument; for each
program, there are the options that the user can choose and the default value:
Program Description
P9.1
TEMPERATURE U.M.
P9.2 DATE AND TIME SET
P9.3 BACKLIGHT MODE
P9.4 BRIGHTNESS
P9.5 SLEEP MODE
P9.8 RESET
P9.9
AUTO POWER-OFF
P9.1 Unit of measurement for temperature
Access this setup menu to select the temperature unit to use:
°C -default-
•
°F
•
P9.2 Date and time setting
Access this setup menu to update the device date and time.
Use the directional keys to change the year, confirm with
day, hours and minutes.
UM Serie Oxy70Vio EN rev.0 28.05.2020
, use the directional keys to scroll through the different stored values.
to access the SETUP menu.
and to select the program to access.
°C / °F
-
INDOOR – OUTDOOR-AUTOMATIC
LOW – MEDIUM - HIGH
OFF – 2 MIN – 5 MIN
YES - NO
YES – NO
20
to enter the RECALL MEMORY mode.
Options
and repeat the same operation for month,
.
Factory Default Settings
°C
-
AUTOMATIC
MEDIUM
2 MIN
NO
NO
EN