Seko TEKNAEVO TPG Manuel D'installation page 7

Display during Operation
Operating mode

Batch
Alarms and statuses

Lev = Level alarm

Flw = Flow alarm

Mem = Memory alarm
Paragraph 7 – Proportional to External Impulses (ppm dosage)
Programming
PROG
Configuration
Pump Funtions
-
+
Pump Functions
ppm Mode
-
ppm Mode
ppm 50
-
ppm Mode ppm Mode
Pulse/L
Pulse/l 4
-
ppm Mode
L/pulse
-
ppm Mode
Conc(%) 100
-
-
ppm Mode
Memory Off
-
Display during Operation
Operating mode

ppm
Alarms and statuses

Lev = Level alarm

Flw = Flow alarm

Mem = Memory alarm
EM00136061
FLOW
Memory
sensor
function
status
status

Batch F F F M M M 7.0ml
Lev Stop 0
Pump status

Empty = pump in start

Stop = pump stationary

Paus = pump in pause
+
-
+
4
-
+
-
+
4
+
+
FLOW Memory
sensor function
status status
Ppm F F F M M M 10
Lev Stop F300s/m
Pump status

Empty = pump in start

Stop = pump stationary

Paus = pump in pause
Programmed value
Quantity in ml
Current dosage value

Gradually displays
the dosed quantity
The pump doses in proportion to an external signal (i.e.:
impulse launch counter), automatically calculating the
relationship between incoming signals and pump strokes on
the basis of the programmed ppm value.
The data to be entered is the ppm value, the impulse/litre
ratio (or litre/impulse) of the counter and the concentration of
the product to be dosed.
The dosage frequency can be modified during operation, by
pressing the
the flow, or the
Programmed ppm
value
Current dosage value

Frequency
rev. 2.1
Display during Setting (MODE key)
Operating mode

Displays in sequence: quantity to
be dosed, dosage time and pump
frequency
Q.ty 7.0ml
7.0ml
Dosage value

The quantity can be modified by pressing the
+ or – keys at the same time
Operation
keys at the same time to increase
keys to decrease it.
Display during Setting (MODE key)
Operating mode

Displays in sequence: cc/stroke,
impulses/minute on the counter and %
concentration of the chemical product
cc/stroke 1.0
0.23 F300s/m

The dosage frequency value can be
modified by pressing the + or – keys
at the same time.
Dosage value

Programmed
ppm value
6