Using The Sleep Timer; Adjusting Brightness Of Front Panel Display - Yamaha TSX-B141 Mode D'emploi

OTHER FUNCTIONS AND INFORMATION
You can set the time until the unit automatically enters standby mode.
Top panel
1

ADJUSTING BRIGHTNESS OF FRONT PANEL DISPLAY

Top panel
1
DIMMER

USING THE SLEEP TIMER

SNOOZE/SLEEP
1
Press SNOOZE/SLEEP a number of
times to set the time until the system
enters standby mode.
The sleep timer can be set to 30, 60, 90 and
120 minutes.
When the time is set, the sleep indicator (
shown on the front panel display.
Sleep indicator
y
If you press SNOOZE/SLEEP while the sleep timer
is activated, the sleep timer setting will be canceled.
1
Press DIMMER.
Each time the button is pressed, the setting
changes in the following order:
A (auto) 3 (brightest)
back to A
Note
When AUTO is set, the brightness of the front panel
display is adjusted automatically with the illumination
sensor (☞ P. 5). Ensure that the sensor is not covered.
) is
2 1 (darkest)
21
En