Storage; Disposal; Troubleshooting - SilverCrest SEMK 105 A1 Mode D'emploi

Storage

♦
Allow the appliance to dry completely before putting it away . To do this,
leave the lid
♦
Store the appliance in a dry and clean location . Close the lid
store the appliance . Otherwise, dust can accumulate in the appliance and
the contaminate the next batch of ice cubes .

Disposal

The symbol shown on the left of a crossed-out dustbin means that this appliance
is subject to Directive 2012/19/EU .
This directive states that this appliance may not be disposed of in normal house-
hold waste at the end of its useful life, but must be taken to a specially set-up
collection point, recycling depot or disposal company .
This disposal is free of charge for the user . Protect the environ-
ment and dispose of this appliance properly .
The coolant used in this appliance must be disposed of with the appropriate care .
You can obtain further information from your local disposal company or the city
or local authority .

Troubleshooting

Malfunction
The appliance is
not working .
The "Add water"
lamp lights
up .
■ 28 │ GB │ IE
open for a while to allow any moisture to escape .
Cause
The plug is not inserted into
a mains power socket .
The appliance is defective .
There is not enough water in
the water tank .
The water filter in the water
tank is blocked .
The pump is defective .
Remedy
Connect the plug to the power supply .
Contact the Customer Service depart-
ment .
Fill the water tank as described in
the section "Filling the appliance" .
Remove any deposits or objects that
are blocking the water filter .
If necessary, you can remove the wa-
ter filter by pulling it straight upwards .
Replace it before using the appliance
again .
To deal with stubborn deposits,
proceed as described in the section
"Cleaning and care" .
Contact the Customer Service depart-
ment .
when you
SEMK 105 A1