Publicité
Les langues disponibles
Les langues disponibles
Trouble Shooting
malfunction
Drill unit has to much
play (vibration)
According to the general supply conditions for business dealings, suppliers
have to provide to companies a warranty period of 12 months for redhibitory
defects. (to be documented by invoice or delivery note)
Damage due to natural wear, overstressing or improper handling are
excluded from this warranty.
Damages due to material defects or production faults shall be eliminated
free of charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
eclaration of Conformity
D
It is necessary that the machine (f. e. EBM 300/3 P) used in this drill rig
comply with the requirements which are described in the specifications of
the drill rig (f. e. drilling diameter, fixture of the motor).
We declare that this unit has been designed in compliance with
2006/42/EC.
This unit must not be put into service until it was established that the Power
Tool to be connected to this unit is in compliance with 2006/42/EC
(identified by the CE-marking on the Power Tool).
Vakuum Technik GmbH Eibenstock
Lothar Lässig
31.01.2013
possible cause
stand has been loose
guidance has to much play
thrust piece worn
Warranty
repair
adjust the wing nut
adjust guidance (see page 18)
replace the thrust piece
20
.
Publicité
