Publicité
Les langues disponibles
Les langues disponibles
Insert the core drill with the attached mounting plate into the drill rig and
lock it with the turnstile (see picture above).
For the operation of the core drill, its operating instructions and safety
advices have to be strictly observed!
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be
avoided.
Make sure to always keep the work area in view and to be able to reach
all necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid
accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of
about 2 m around the drill position, so that you can work safely and have
immediate access in case of a failure.
The tool is supplied with a mounting plate,
a 10 mm fitting key and 4 Allen screws
M8x20. The mounting plate is put on in such
a way with the fitting key on the machine that
the socket is in the mounting plate on the
same side as the gear switch of the machine.
Afterwards the four screws are insert and
tightened firmly.
Operations
17
Publicité
