Pioneer PRA-BD11 Mode D'emploi page 24

Troubleshooting
M PRA-BD11 (continued)
Symptom
Audio input via AES/EBU is
broken up and cannot be
correctly output from the DVD
recorder.
If "SDI" and "AES/EBU" do not appear as options under [V input] and [A input] on the
STATUS section of the DVD recorder's Function Menu, contact your dealer.
M PRA-BD12
Symptom
Video/audio signals input to the
DVD recorder are not output to
the industrial VTR monitor
connected to the SDI and
AES/EBU output connectors.
A DVD playback image cannot
be monitored on an industrial
VTR connected to the SDI
output connectors.
Nor is audio available (ditto
AES/EBU output).
Compressed audio cannot be
output via the AES/EBU
connectors.
24
PRA-BD11 / PRA-BD12
En
÷ Check whether an AES/EBU signal synchronized with
the video input selected on the DVD recorder is input.
÷ Check whether the unit is correctly connected to the
industrial VTR.
÷ Check that the DVD recorder is in the playback,
preview or recording mode. Video/audio inputs are not
output when the DVD recorder is idle. Video/audio
output from the output connectors of this board
operate in the same way as the DVD recorder's
monitor output connectors (Decoder Out).
* Video/audio data is not output when playing back
content containing signals preventing unauthorized
copying to protect copyright holders, etc
* The PRA-BD12 does not support through output
of SDI and AES/EBU signals via the PRA-BD11 (SDI
AES/EBU input board).
÷ Check whether the unit is correctly connected to the
industrial VTR.
÷ Video/audio from a copyrighted DVD disc cannot be
output via the SDI and AES/EBU output connectors.
÷ This unit does not support the output of compressed
audio.
Use the digital audio output connectors on the DVD
recorder.
Cause/Remedy
Cause/Remedy