Removing The Acryl Sheets - Hapro Luxura X3 Mode D'emploi

1
4x
B
1
Removing the acrylic sheets
2
3
4
A
2
A
B
- 8 -
1
Remove the 4 round headed screws.
2
Click the cover profiles open.
3
Take the acrylic sheet out by first raising it at the front of
the tanning unit and then sliding it out from the rear cover
profile.
4
Also remove from the canopy the 4 round headed screws and
click the cover profiles open. Then turn the body blower and/or
headfan slightl y outwards (see A). Now press the acrylic sheet
slightl y inwards (see B) so that it has more play. Remove the
acrylic sheet first from the front side and then slide it out from
the rear cover profile.
Remove
face tanners .
1
Remove the metal cover plate.
2
Loosen the cross-slotted screw (A) as indicated and snap open the
blue filter window (see B).
(optional)