Sony SDM-V72W Mode D'emploi page 38

Symptom
Picture is ghosting
Picture is not centered or sized
properly
Picture is too small
Problem caused by a connected
computer or other equipment, and
not caused by the display
Picture is dark
Wavy or elliptical pattern (moire)
is visible
Color is not uniform
White does not look white
The display turns off after a
while
Check these items
Eliminate the use of video cable extensions and/or video switch boxes.
Check that all plugs are firmly seated in their sockets.
Adjust the pitch and phase (analog RGB signal only) (page 23).
Adjust the picture position (analog RGB signal only) (page 23).
Note that some video modes do not fill the screen to the edges.
Set the zoom setting to Full (pages 22 and 30).
Set the resolution to the screen resolution.
Adjust the brightness (pages 20 and 26).
Adjust the backlight (pages 20 and 26).
Adjust the pitch and phase (analog RGB signal only) (page 23).
Adjust the pitch and phase (analog RGB signal only) (page 23).
Adjust the color temperature (pages 20 and 26).
Try pressing a key on the keyboard to exit from Power Save mode.
- 37 -