Festool CTH 26 E/a Notice D'utilisation page 22

► After extracting fluids, clean the fill level
sensors [10-1] regularly with a soft cloth
and inspect for damage.
10 Accessories
The order numbers for the accessories and fil­
ters can be found in the Festool catalogue or on
the Internet at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile
dust extractor are available in the accessories
programme. Modules must be fitted to the
module slot [1-3] by an authorised service
workshop:
– Compressed air module,
– Socket module with permanent power sup­
ply,
– Socket module with automatic switch-on
unit (not suitable for GB 110 V version),
– Energy box module (EAA) for using the au­
tomatic switch-on unit on the EAA.
You can find more detailed information on the
modules at "www.festool.com".
11 Environment
Do not dispose of the device in house-hold
waste! Recycle devices, accesso-ries and
packaging. Observe
regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equip-ment
and implementation in national law, used
electric power tools
separately and handed in for environmentally
friendly recy-cling.
Information on REACh: www.festool.com/reach
22
applica-ble national
must be collected
English