Kd-75Xf90Xx Only - Sony Bravia KD-75XF90 Série Guide De Référence

KD-75XF90xx only

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as
packaged.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of your TV
on the wall be performed by qualified professionals. Do not attempt to install it yourself.
• Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV's weight.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach
the Table-Top Stand. Keep the screws away from small children.
1
Remove the screws from the rear of the TV.
2
Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Wall-Mount Bracket (not
supplied)
Screw (not supplied)
GB
13
GB