Teesa TSA3227 Manuel D'utilisation page 16

16 Owner's manual
EN
7. After assembling the appliance correctly, plug the power cord to power mains socket.
Press and hold one of the speed modes buttons. Release the button to stop operation.
Main/second level blade assembly
ASSEMBLE THE BLADES ONLY WHEN THE PROTECTIVE COVERS ON THE BLADES ARE ON!
Do not touch the blades – they are extremely sharp and may cause injury!
Assemble method: Put the second level blade onto the main blade unit shaft, and screw the
second level blade anticlockwise until the line markings on the blades are aligned (see figure
below). Make sure the blades have been assembled correctly – improper blades assembling
may cause damage or injury!
Disassemble method: Rotate the second level blades clockwise from main blade unit, and
remove from the shaft.