Battery Connections; Operating The X1 Pro Charger; Lithium - Chemistry Batteries - HITEC X1 PRO Mode D'emploi

5. Battery Connections

To utilize the charger's absolute maximum charging
capabilities, the DC power source must be capable of
delivering at least 17 amps while maintaining 12 V DC.
Connecting the battery
Before connecting a battery it is absolutely essential
to check one last time that you have set the parameters
correctly. If the settings are incorrect, the battery may be
damaged, and could even burst into fl ames or explode.
To avoid short circuits between the banana plugs, always
connect the charge leads to the charger fi rst, and only then
to the battery. Reverse the sequence when disconnecting
the pack.
Balance socket
The balance wire attached to the battery must be connected
to the charger with the black wire aligned with the negative
symbol (–). Take care to always maintain correct polarity!

6. Operating the X1 Pro Charger

The joystick feature makes operating the X1 Pro very easy.
Simply toggle the joystick up, down, right or left to scroll
through the various programs and change program settings.
Detailed descriptions of how to locate and edit each program
feature is given in the following sections.
Toggle the joystick up or down to scroll
through the various programs/modes or
to increase/decrease program settings.
Toggle the joystick to the right to select/set
a parameter or to start
the charging process.
Toggle the joystick to the left to return to
the previous screen or to stop the charging
process.

7. Lithium - Chemistry Batteries

This program is only suitable for charging/discharging
lithium (LiPo/LiIon/LiFe) batteries.
32
Professional Balance Charger, Discharger
This image shows the correct way to connect your battery
to the X1 Pro while charging with the use of a balance
adaptor. This is the rocommended method for charging and
discharging.