Agu SHE7 Mode D'emploi page 65

3. OBJECT TEMPERATURE MEASUREMENT
1. Press «EAR» button to switch on the device.
2. Remove the cap.
3. Simultaneously press and
hold for 3 seconds «SET»
and «MEM» buttons icon
will appear on the display.
4. Bring the thermometer to
the measurement object so
that there is a distance of
3-5 cm between the sensor
and the object.
5. Press «EAR» button.
When the measurement is completed, you will hear a beep sound, and the
measured value will appear on the display.
OPERATION VIA MOBILE APPLICATION
NOTE
Mobile application provides opportunity to:
• save the temperature measurement history;
• save the temperature measurement history for different users;
• take notes on symptoms and general state;
• take notes on medicines taken.
NOTE
The object temperature measurement history is not stored in the application.
EN
1
2
65