Publicité
Les langues disponibles
Les langues disponibles
Assembly and operation
Assembly and operation of your
described in the following drawing.
Please connect all components only when the mains power switch (AC POWER) is switched
OFF.
Place the subwoofer at its target area. The best position for the subwoofer is at the area in
•
between the stereo speakers. Please keep a clearance of minimum 10cm to walls or other
components to ensure a powerful bass radiation.
•
First, connect the inputs (INPUT L or R resp. both) on the backside of
subwoofer output of your sound source device. You can employ the provided RCA cable for this
connection. Please follow the connection examples in the following chapter to understand the
various possibilities with different sources.
•
Before mains connections, check your mains power system to be appropriate to the
FUSION
can be operated on 115V or 230V AC mains. The mains voltage is set automatically
by the built-in power supply.
•
Connect the mains cable to mains input socket and the Euro plug connect to your mains supply.
•
Switch on the main switch AC POWER on the back.
•
Adjust the subwoofer level with the LEVEL control on the backside.
Please care not to overstroke the woofer too much (audible distortions) since this can reduce
the life-span of the woofers!
•
POWER selector for automatic and manual ON-/STANDBY function:
With this switch you can manually deactivate (STANDBY) the subwoofer, chose the automatic
ON-/STANDBY function (AUTO) or force continousthe subwoofer to remain ON continously.
AUDIO SIGNAL SENSING: if the input signal is very low or off for more than 10 minutes, the
audio signal sensing automatically changes to STANDBY. Once there is an audio signal, the
audio signal sensing automatically switches ON again! This function is achieved when the
POWER switch is set to the AUTO position.
English
FUSION
subwoofer is very easy to do. General connections are
10
FUSION
with the
FUSION
.
Publicité
