Maintenance And Care; Service - Conductix-Wampfler 040450-06x12 Instructions D'utilisation

Operating Instructions
Hose Reel
040450-...
6

Maintenance and Care

The spiral flat spring
No special maintenance is required on the spiral flat spring. If after a while a release is observable, the spring tension has to be
readjusted ⎥ refer to "Adjustment of the spring tension".
The axis with ball bearings
No special maintenance is required on the axis with ball bearings.
The hose
Every hose may burst because of outer damages and/or because of ageing. In order to prevent eventual damages through
abnormal flow out of fluid or gas, the wear of the hose should be checked regularly.
If necessary the hose should be changed!
7

Service

Caution
The spiral flat spring must be completely released before any service!
How to demount the hose reel
•
Disconnect the hose reel from the supply of fluid or gas.
•
Draw the hose completely from the reel. Stop the drum (Pos. 110).
•
Detach the hose with the reinforcement (Pos. 160).
•
Take off the reel and release the spiral spring by stopping the drum manually.
Caution
The drum is spring pressured: Never release!
Injury danger and spring damages risks!
•
Release the threaded pin (Pos. 12) and take off the support (Pos. 10).
•
Remove the drum: the spring cover (Pos. 210) must face upwards.
•
Unscrew the spring cover and take it off carefully.
•
Carefully take off the spiral flat spring (Pos. 190) and secure it against springing out.
•
Release the counter nut (Pos. 70) and the screws (Pos. 50) : now take off the complete screening.
•
Remove the retaining ring (Pos. 130) and remove the rotating body (Pos. 150)
•
Remove the rings (Pos. 140).
How to reinstall the hose reel
Assemble the hose reel in opposite sequences.
For the installation of the hose, refer to the chapter "Installation of the hose".
Advice
If the hose has not to be completely coiled up on the drum, the spring tension must be re-adjusted ⎥ refer to the chapter
"Adjustment of the spring tension".
BAL0400-0058b-D/E/F
www.conductix.com Seite 13 von 20