Häfele dialock LockerLock LL 100 Instructions D'utilisation page 10

3. Security
3.1 Safety instructions
and dangers
4. Installation
5. Start-up
10
Each user key can lock an open locker. This user key is then programmed. Only this
programmed key can unlock the locker again. Unlocking the locker clears the
allocation of the key again.
NOTE
The "Free choice of locker" function requires the use of the ST 100 Info
Terminal set in order to be able to clear user keys. If an ES 100 encoding
station is installed in the Dialock system, this can be used to clear the user
keys.
> For more information see operating instructions of the ST 100
terminal set and the ES 100 encoding station.
The product has been built in accordance with the latest state of technology and the
recognised technical safety regulations. Nevertheless, danger to persons or
damage to product or other property could occur during installation and use.
WARNING
Risk of fatality due to failures or faults in electromagnetically
sensitive devices!
The electromagnetic radiation of the product can cause faults in sensitive
equipment (e.g. in medical equipment). The functionality thereof will be
adversely affected.
> Do not place product close to electromagnetically sensitive
devices.
> Pay attention to the safety instructions for the electromagnetically
sensitive devices. If you have any doubts regarding compatibility,
please contact the manufacturer.
NOTE
Damage to product due to damaged wires!
Damaged wires affect the functionality of the product.
> Do not trap or damage wires during installation.
> Never use products with damaged wires.
The installation instructions are a separate document and are enclosed with the
product. They are exclusively intended for:
• The operator
• The installation and start-up personnel
After these groups of people have read chapters 1 - 3 of these operating instructions,
they should then obtain and read the separate "Installation instructions"
document for installation purposes.
The product is supplied in the simple mode for stand-alone operation (SA). These
instructions only describe how to start up in this mode.
• For other operating modes, contact the manufacturer
• Details of use of the product with software applications (info terminals etc.) can
be found in the respective operating instructions