nVent RAYCHEM FROSTEX Mode D'emploi page 6

2F. Cover the end seal with tape
Layer the aluminum tape as shown. Ensure
the edge of the tape is 0.5 in (1.3 cm) away
from the tip of the end seal.
2G. Fold the aluminum tape
Press onto the end seal as shown.
2H. Fold the bottom edge of the tape
Fold toward the end seal.
6 | nVent.com/RAYCHEM
0.5 in (1.3 cm)
0.5 in (1.3 cm)
2I. Wrap the end seal with the remaining tape
Press the aluminum tape firmly onto the end
seal and braid.
2J. Final assembled end seal