Temperature Setting Buttons - AEG SK 98800-6I Mode D'emploi

Control panel
A Pilot light (green)
B ON/OFF switch
C Temperature setting buttons (for
warmer temperatures)
D Temperature display
E Temperature setting buttons (for colder temperatures)
F SUPERCOOL indicator light (yellow)
SUPERCOOL for intensive fridge cooling
G Push button for SUPERCOOL

Temperature Setting Buttons

The temperature is adjusted using the "+" (WARMER) and "-" (COLDER)
buttons.
These buttons are connected to the temperature display.
The temperature display is switched over from the display of the ACTUAL
temperature (temperature display is illuminated) to the display of the
DESIRED temperature (temperature display flashes) by pressing one of the
two buttons, "+" or "-".
With each further press of one of the two buttons, the DESIRED
temperature is adjusted by 1°C.
If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of the
ACTUAL temperature.
DESIRED temperature means:
The temperature that is required in the refrigerator, this can be adjusted to
the temperatures shown in the display. The DESIRED temperature is indicated
by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the temperature that is currently present
in the refrigerator. The ACTUAL temperature is indicated by continuously
illuminated numbers.
30