Disposal; Technical Data; Troubleshooting - Beurer BY 52 Mode D'emploi

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its
useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the device
in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any
questions, please contact the local authorities responsible for waste disposal.

10. Technical data

Operating voltage:
Power consumption:
Heating time:
Temperature for keeping warm: 35 °C - 85 °C

11. Troubleshooting

Fault
Water leaks from the bottom of
the device when in use.
The warming process does not
start or does not end.
No LED display
The baby food warmer does not
switch on once it is plugged in.
The temperature on the display
does not increase once the
warming process is started; the
device switches itself off after
a while.
The food is not warm at the end
of the warming process.
220–240 V ~ / 50/60 Hz
80 watts
3 - 18 min.
Cause
Device faulty
Thermostat broken
Mains plug not (correctly)
plugged in or device faulty
No electricity
No water in the device
Not enough water in the device
12
Action
Switch off the device immedi-
ately, unplug it, let the water
drain out and return the device
to the retailer.
Switch off the device immedi-
ately, unplug it, let the water
drain out and return the device
to the retailer.
Check that the mains plug is
(correctly) plugged in. If there
is still no display, switch off the
device, unplug it and return it to
the retailer.
Check that the mains plug is
correctly plugged in.
Unplug the device, let it cool
down, then fill it with water and
start the warming process as
described in these instructions.
Unplug the device, let it cool
down, then fill it with sufficient
water and start the warming
process as described in these
instructions.