DHG 11210 Manuel D'utilisation page 3

ReadySlide
System
ReadySlide is made of ULF (Ultra Low Friction), Direct Healthcare Group's own unique sliding material. By reducing the
friction under the user, safe and easy transfers can be performed with very little effort and without the need for lifting. It is
comfortable for the user and it saves the caregiver's back and shoulders.
ReadySlide is available in different sizes. The larger sliding mats are used for transfers between bed and gurney or for
turning in bed. The smaller mats can be used for turning in bed, for repositioning higher up in bed or for transfers
between bed and wheelchair/toilet. The largest size is available both with and without handles at the sides.
Functional inspection
Visual inspection
Check the condition and function of the assistive device regularly. Always inspect the product after laundering. Check
to ensure that seams and material are free from damage. Check to ensure that fabric is not worn or faded. If there are
signs of wear, the product must be discarded.
Mechanical load
Test the friction of the material by pressing it against the underlying
surface and rolling it back and forth (1). Note whether it still glides as
easily as it did. Compare with a new product if possible.
Pull on the handles to check seams and strength (2).
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
Note
Remember to remove the product after use, as it has a very low-friction surface.
NOTE! Always lock the wheels on the bed, gurney and wheelchair.
System
I F U
Instructions for use - English
3