Dometic GROUP WAECO CF11 Notice D'utilisation page 29

CoolFreeze
6.6 Switch on the cooling device (fig. 1, page 3,
fig. 2, page 3)
A
NOTICE! Risk of damage!
 Always ensure sufficient ventilation so that the heat generated
during operation can dissipate. Ensure that the ventilation
slots are not covered. Make sure that the device is sufficiently
far away from walls and other objects so that the air can circu-
late.
 Ensure that the items placed in the cooler are suitable for cool-
ing to the selected temperature.
 Disconnect the cooler and other electric consumers from the
battery before you connect the battery to a quick charging
device. Overvoltage can damage the electronics of the device.
For safety reasons, the cooler is equipped with an electronic system to pre-
vent the polarity being reversed.This protects the cooler against reversed po-
larity when connecting to a battery and against short circuiting.
➤ Press the ON/OFF button (1) for three seconds.
✓ The "POWER" LED (2) is lit green.
Once the cooling device has reached the saved temperature, the LED
lights up orange.
✓ The display (5) switches on and shows the current cooling temperature.
✓ The cooler starts cooling the interior.
EN
Operation
29