Dometic GROUP WAECO CF11 Notice D'utilisation page 27

CoolFreeze
6.2 Energy saving tips
 Choose a well ventilated location which is protected from direct sunlight.
 Allow warm food to cool down first before placing it in the device to keep
cool.
 Do not open the cooling device more often than necessary.
 Do not leave the lid open for longer than necessary.
 Defrost the cooling device as soon as a layer of ice forms.
 Avoid unnecessarily low temperature settings.
6.3 Locking the cooling device
➤ Close the lid.
➤ Press the latch (fig. 3 7, page 3) down, until it latches in place audibly.
6.4 Connecting the cooling device
Connection to the DC socket
I
NOTE
If you connect the cooler to the DC socket, remember that the
ignition must be turned on to supply it with power.
➤ Place the cooler on a firm base.
Make sure that the ventilation slots are not covered and that the heated
air can be dissipated.
➤ Connect the 12/24 V connection cable to the DC socket in the vehicle.
EN
Operation
27