Operating Elements And Displays - CASO DESIGN WineMaster Touch 38-2D Mode D'emploi

12.1 Operating elements and displays

The device transmits the following signal sounds as an acoustic feedback signal:
Please note
► Use the buttons
22°C.
► Temperature recommendations: Red wine: 12°C – 16°C and white wine 6°C – 10°C.
► The display indicates the average temperature of the appliance at the moment.
► When working both up and down zone, setting temperature of upper zone must lower
than down zone.
► Due to the technical structure of the device the level of energy efficiency is higher if a
colder or the same temperature is set in the upper zone compared to the lower zone.
Winemaster Touch 38-2D
If you press the power button of :
When the LED lights the device is working.
You can set the temperature as your desire by pressing the button. There are three press-
button on the panel " " and " " to adjust the temperature by 1°C among 5-22°C.
You can tune the interior light on or off by pressing the "Light" button.
Pushing the temperature key up and down for 5 seconds, then, temperature display mode
will be exchange between °C and °F.
Winemaster Touch 66
By pressing the button Power you switch on the two zones on the keyboard: With the left
keyboard you control the upper zone, with the right keyboard you control the lower zone.
When the LED lights the device is working. You can set the temperature as your desire by
pressing the button. There are press-button on the panel + and - to adjust the temperature
by 1°C among 5-22°C.
You can tune the interior light on or off by pressing the "Light" button.
Pushing the temperature key + and - for 5 seconds, then, temperature display mode will be
exchange between °C and °F.
caso WineMaster Touch
and to set the temperature for the two top shelves in the range of 5-
Upper zone -> the device is switched on
Down zone -> the down zone is switched on/off
32