Spares & Accessories - Elcometer 107 Guide D'utilisation

5 ASSESSING THE RESULTS (continued)
Example Appearance
Minimum Maximum
Removal Removal
6 SPARES & ACCESSORIES
6.1 CUTTER BLADES
The Elcometer 107 is supplied complete with a cutter blade. Various
cutting blades are available for different substrate types and coating
thicknesses, for use in accordance with different test methods and
International Standards.
Cutter blades are interchangeable and are available with or without a
calibration certificate.
Cutter Blade
6 x 1mm
6 x 2mm
6 x 3mm
11 x 1mm
11 x 1.5mm
Description
The coating has flaked along the
edges of the cuts in large ribbons
and/or some squares have
detached partly or wholly. A cross
cut area greater than 35%, but not
greater than 65%, is affected.
Any degree of flaking that cannot
be classified even by
classification 4 or 1B
Suitable for
Test Method
ISO/JI ASTM
ü ü
ü ü
ü
ü
AS Uncertified
T99913700-1
ü
T99913700-4
T99913700-5
ü
T99913700-2
T99913700-3
Classification
ISO/JI
S
4
5
Part Number
Certified
T99913700-1C
T99913700-4C
T99913700-5C
T99913700-2C
T99913700-3C
R
ASTM
1B
0B
en-8