Schildmeyer 701500 Notice De Montage page 12

EN
Risk of crushing! There is a danger of crushing when the position of the desk top is altered! For this reason, make sure that there are no
objects or persons in the danger area and that the danger area cannot be accessed. Maintain a lateral safety clearance of at least 50 mm
from any other piece of furniture!
Risk of electric shock!
• Never open the control unit of the desk! There is a risk of electric shock.
• Do not connect the desk to the mains power supply until it has been completely assembled!
• The control unit may only be operated with the mains voltage specified on the type plate! Before using the desk, check whether the
mains voltage specified on the type plate corresponds to your mains voltage.
• Always use the power supply cable supplied! Make sure that the power supply cable is not damaged. Arrange for damaged cables to be
replaced immediately by a person qualified to do so.
• Do not place the power supply cables near any sources of heat! The cable may be damaged by the effect of the heat. There is a risk of
fire or electric shock.
• Disconnect the desk from the mains if it is not in use for a protracted period of time.
Caution!
• Make sure that no open windows or chairs block the travel path of the desk! This can lead to personal injury or damage the system.
• The application is not designed for continuous operation. The drives must not be overloaded as this may lead to personal injury or
damage the system. The height of the desk top must not be adjusted for a continuous period of more than 2 minutes, followed by a
pause of 18 minutes.
• If the control unit makes any unusual noises or emits any unusual odours during operation, unplug it from the mains.
• In the event of any malfunction (e.g. unintentional movement of the desk top if a button on the hand control should jam), please
immediately unplug the desk from the mains.
• Do not use the drive system to lift persons. Do not sit or stand on the system during operation (risk of injury).
• Only use the system in closed rooms. Protect the desk and in particular all electrical components from moisture, dripping and
splashing water!
Assembly instructions
Before installation, de-installation or troubleshooting:
• Block the pillars.
• Switch off the power supply and unplug from the mains.
• Remove any weight from the pillars.
Before using for the first time:
• Make sure that the system has been installed in accordance with the assembly instructions.
• Make sure that the voltage on the control unit is correct before plugging in the system.
• The individual elements of the system must be connected to each other before the control unit is plugged in.
Care instructions
Always use soft, slightly moistened cloths or leather to clean the desk top. Make sure that all parts are wiped dry after use or cleaning. Avoid abra-
sive substances or substances containing solvents and do not use microfibre cloths.
Danger: The control unit, the control panel and the desk may only be cleaned with a dry or slightly moistened cloth.
No liquid must be allowed to enter the system (control unit, control panel, cable and rack).
Aggressive detergents may cause damage or discolouring of the product. Accordingly, only detergents with a pH value of 6-8
may be used.
Because such damage is not covered by the guarantee, we would ask you to follow these instructions carefully to ensure that you enjoy your pro-
duct for many years to come. For care instructions for the individual materials, please visit our homepage at: www.w-schildmeyer.de
Disposal
The packaging consists of recyclable materials. Please dispose of the packaging in accordance with your valid local regulations
in an environmentally friendly manner. At the end of its useful life, do not dispose of the product with the household waste. Please remove all
electrical components from your item of furniture before disposal. Ask your communal administration for possibilities of an environmentally
sound disposal.
The product must not be disposed of via household waste.
The marked components must be removed before the furniture is disposed of.
Please note the disposal instructions and the dismantling instructions
on page 53 in this connection.
12 04/2020