Setting The Time; Using The Stopwatch; Setting The Date - Lotus ILMJS05 Manuel D'instruction

ILMJS05/15/25

SETTING THE TIME

1. Pull the crown out to the 2nd Click Position.
2.
Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the Normal position.

SETTING THE DATE

1. Pull the crown out to the 1st Click Position.
2. Turn the crown clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 1:00 AM, the date
may not change on the following day.
3. After the date has been set, push the crown back to the Normal position.
16
ILMJS05/15/25

USING THE STOPwATCH

This stopwatch is able to measure and display time in 1/1 second united up to maximum
of 30 minutes. Stopwatch will stop automatically after running continuously for 30
minutes.
[Measuring time with the stopwatch]
1. Press button " A " to start the Stopwatch.
2. The Stopwatch can be started and stopped each time button "A" is pressed.
3. Press button "B" to reset the Stopwatch and Stopwatch minute and second hands
return to their Zero positions.
Reset
measurement
Time
Stop
17 17