Chronograph Reset - Lotus ILMJS05 Manuel D'instruction

ILMJS05/15/25

CHRONOGRAPH RESET

(incl. aftEr rEplacing battEry)
This procedure shoud be performed when the Stopwatch second hand does not return to the
Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button "A" to set the stopwatch second hand forward.
Press the button "B" to set the stopwatch second hand back.
* The stopwatch minute hand is synchronized with stopwatch second hand.
* The stopwatch second hand can be advanced rapidly by continuously pressing button
"A" or "B".
3. Once the both hands been zeroed, reset the time and return the crown to its normal
position.
18
By virtue of the regulations pursuant to the handling of waste products deriving
from electronic and electrical equipment, end of lifecycle watch making products
must be selectively collected for processing. You may therefore dispose of your
quartz watch making products at any of our retail outlets or any other authorized collection
point. The selective collection, processing, rating and recycling of these products helps
contribute to safeguarding the environment and protecting our health.
19 19