Mounting And Electrical Connection - Knick VariTrans P 2900 P2 Série Mode D'emploi

Mounting and Electrical Connection

The devices are snapped onto TS 35 standard rails and
laterally fi xed by suitable end brackets.
See dimension drawing for terminal assignments.
Conductor cross-section: 0.2 mm
Terminal assignments and dimensions
17,5
5.1 5.2 5.3
6.1 6.2 6.3
Power supply*
Current output**
(passive/active)
Not connected
Not connected
* The polarity has no effect when operated with direct voltage
** The signal outputs are short-circuit and idle proof
2
... 2.5 mm
99,0
Power supply*
GND output
Input, positive
Input, negative
2
(AWG 24-12).
Note: All dimensions in mm
Not connected
Voltage output**
Input, positive
Input, negative
3.3 3.2 3.1
1.3 1.2 1.1
37