Switching The Playback Information Display; Repeating Playback (Repeat Play) - Yamaha PIANO CRAFT MCR-640 Mode D'emploi

DISC AND USB DEVICE OPERATIONS
Switching the playback
information display
You can switch the disc playback information shown in
the CD player's front panel display. Available information
differs depending on the type of the disc/USB device.
DISPLAY
Press DISPLAY repeatedly while playing back a
disc/USB device.
Each time you press the key, the information display
changes as described in "Playback information for audio
CDs" and "Playback information for MP3 or WMA files
recorded on discs/USB devices".
Notes
• Some information may not be available depending on a disc/
USB device.
• Some special characters may not be shown properly.
■ Playback information for audio CDs
The following information can be displayed during
playback of an audio CD.
1
Elapsed time of the current track (Default)
2
Remaining time of the current track
3
Remaining time of the disc
■ Playback information for MP3 or WMA
files recorded on discs/USB devices
The following information is available during playback of
an MP3 or WMA disc/USB device.
1
Elapsed time of the current file
2
File name
Note
After a file name is displayed for a few seconds, the screen
automatically returns to the elapsed time display.
16
En
Repeating playback
(Repeat Play)
You can play back a single track or all tracks on a disc/
USB device repeatedly.
1
Play back the disc/USB device you want to
repeat.
2
During the playback of the disc/USB device,
press REPEAT to select the desired Repeat
Play mode.
Each time you press the key, the Repeat Play mode
indicator in the CD player's front panel display
changes as follows.
Off (Normal playback)
REP S (Repeat Play by the current track)
REP ALL (Repeat Play by disc/USB)
To cancel Repeat Play
Press REPEAT repeatedly so that the Repeat Play mode
indicator disappears from the front panel display.
Note
The Repeat play mode is canceled when the disc/USB device is
removed.
y
"REP OFF" appears when the system is set to Pure Direct mode.
REPEAT