Front Panel - JB Systems Compact 11010 Mode D'emploi

FRONT PANEL

1. Power ON indicator and ON/OFF power switch.
2. 5-steps LED level display ('L' and 'R').
3. Input selector switches for CH1 and CH2.
Switchable between phono (PHONO) and stereo line (CD/LINE).
4. Input Gain: with this rotary VR you can adjust the input level of
CH1 and 2. Please select the channel that you want to adjust
with n°13 (cue select) and adjust the rotary VR in such way that
the LED display is centered around 0dB.
5. 2-way tone control for the input channels consisting of HIGH
and LOW controls from –26 to +12dB.
6. Volume controls (faders) for the input channels CH1 and CH2.
7. Crossfader for fading between channels CH1 and CH2.
8. TALKOVER toggle switch for microphone anouncement.
When the TALKOVER is selected, the level of the music output is
attenuated by 12dB.
9. Volume control fader MASTER for the stereo master output (18).
10. 1/4" Jack for connecting stereo headphone (impedance > 8 Ω).
11. 1/4" Jack for connecting mono microphone.
12. Volume control PHONE VOL. for the headphones connected to
Jack (10).
13. CUE SELECT 3-way toggle switch for headphone output CH1 or
CH2 or MASTER selected.
14. Volume control MIC VOL. for the microphone connected to Jack
(11).
3 Compact