Package Contents - Denon DJ MC4000 Guide D'utilisation

User Guide (English)
Introduction

Package Contents

MC4000
USB Cable
Power Adapter
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denondj.com.
Setup
Important: Occasionally, we may update MC4000's firmware to improve its performance. Visit
denondj.com to check for available firmware updates, especially after you update your
software (firmware updates may address new software features).
Note: Items not listed under the
1. Windows users only: Download and install the latest drivers from denondj.com.
2. Download and install the latest version of Serato DJ Intro from serato.com.
3. Connect input sources (microphones, CD players, etc.) to MC4000.
4. Connect output devices (headphones, power amplifiers, sub-mixer, etc.) to MC4000.
5. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) MC4000, (3) output devices.
• When ending a session, turn off (1) output devices, (2) MC4000, (3) input sources.
6. Using a standard USB cable (included), connect the USB port on MC4000 to your computer.
7. Open Serato DJ Intro and go! For more information on how to use Serato DJ Intro with
MC4000, visit serato.com/dj/support
Computer
Software Download Card
Serato DJ Voucher Card
Introduction > Package Contents
and select Denon DJ MC4000.
Monitors
Power
User Guide
Safety & Warranty Manual
are sold separately.
Powered Loudspeakers
Headphones
(to front panel)
Audio Player
(smartphone, tablet, etc.)
Microphone
3