M-system FD 96 Mode D'emploi page 200

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

SEMI-AUTOMATIC COOKING
This function automatically switches off
the oven after the required cooking time.
1. Fig. 6.6 - To set the cooking time (max
6 hours) press button
ic clock luminous hands go out and a
luminous hand lights up on number 12.
2. Fig. 6.6 - Within 7 seconds press
button and another luminous hand
(like seconds and minutes) lights up
on the display. Every increasing (addi-
tional inner hand) indicates one
minute. Moreover every increasing of
the 12 minutes is indicated by an inner
luminous hand (5 luminous hands indi-
cate one hour). To decrease the
required time press
3. Fig. 6.6 - After 7 seconds the inner
luminous hands turn automatically on
the time of the day indicating the
remaining cooking time.
4. Set the oven by turning the function
and the temperature control knobs to
the required function and temperature
(see relative chapters). The oven starts
to operate immediately and is auto-
matically turned off at the end of the
programmed cooking time.
During cooking the inner luminous hands
flash on the display indicating that the
oven is operating. The inner luminous
hands gradually go out (one each 12
minutes).
During the cooking program it is possi-
ble, at any time, to modify the cooking
time by pressing first
or
.
At the end of the programmed cooking
time the last inner luminous hand goes
out and the oven automatically switches
off; the numbers on the programmer dis-
play flash and a buzzer sounds.
To stop the buzzer press any of the
clock/programmer buttons.
To stop the flashing of the numbers of
the clock press
200
(fig. 6.6)
, the electron-
button.
button and then
button.
The semi-automatic cooking program
can be cancelled at any time by
pressing button
ATTENTION: At the end of the semi-
automatic cooking remember to
switch off the oven manually by turn-
ing the function and temperature
control knobs the "0" (OFF) position.
Attention: After a power cut (black out)
the clock/programmer resets to zero
and cancels the set programs (numbers
of the clock flashing on the display with-
out luminous hands - fig. 6.9).
1
2
3
Fig. 6.6
for 2 seconds.
Start cooking
time (actual)
End cooking
time (actual)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mfd 96

Table des Matières