Attaching With The Securing Strap - Kompernass WK 8 B4 Mode D'emploi

Attaching with the securing strap

NOTICE
► Before setting up, please note that the detection range for
automatic recording is between 0.7 and 20 m.
Use the supplied securing strap C to fasten the camera to a tree or
other object.
The following illustrations show you how to guide the securing strap
through the tree bracket 6 and the strap latch V.
♦ Now hang the camera as desired and press the clip of the strap
latch downwards.
♦ Pull the securing strap tight until the camera is fastened firmly and
then release the clip.
♦ To remove the camera, press the clip of the strap latch down and
pull the securing strap out of the strap latch.
WK 8 B4
GB │ IE │ 35 ■