Status Indicator Light And Sounds - WINBOT ECOVACS 950 Mode D'emploi

Indicator
Status Indicator Light
flashes GREEN
Status Indicator Light
stops glowing
Status Indicator Light
flashes BLUE
Status Indicator Light
glows a continuous BLUE
Status Indicator Light
flashes RED
Status Indicator Light
glows a continuous RED
WINBOT emits beeps

5. Status Indicator Light and Sounds

Back-Up Battery is low and is charging. WINBOT will not clean until
the Back-Up Battery is properly charged.
The Status Indicator Light stops glowing when the Back-Up Battery
is fully charged. This is normal.
WINBOT is powered ON and ready to be placed on the glass.
WINBOT has successfully adhered itself to the glass and is ready
to clean.
WINBOT has a problem. Please refer to section 6, Troubleshooting,
for details.
WINBOT has been placed in Manual Override Mode. Please refer
to section 6, Troubleshooting, for details.
WINBOT beeps in following situations:
WINBOT is powered ON.
WINBOT finishes cleaning.
WINBOT has a problem.
Description
17
EN