Place Safety Pod - WINBOT ECOVACS 950 Mode D'emploi

3. Operating WINBOT
3.5 Place the Safety Pod
Wipe the surface of the Safety Pod's suction cup
clean with the provided Finishing Cloth.
If WINBOT is being used to clean an inside window:
Press the Safety Pod FIRMLY on the top corner
of the inside window. Make sure the Safety Pod is
attached securely in place.
If WINBOT is being used to clean an outside
window: Press the Safety Pod FIRMLY on the inside
of the window being cleaned. Make sure the Safety
Pod is attached and securely in place.
10
EN