Cut Out For Multiframe Control Panel; Cut Out For Touch Sft Control Panel - Thetford Marine TECMA Design Line Installation Et Mode D'emploi

Cut out for Multiframe control panel:

NOTE: The Multiframe control unit is supplied as standard with the Bticino Living
Light series frame. For compatibility of Multiframe with commercial frames, refer to
the following table:
*To install the Chorus line (Gewiss) remove the fins from the Frame B (see the picture)

Cut out for Touch SFT control panel:

Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
Design and Flexi Line | instructions for installation and use | ENG
61
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com