General Terms Of Guarante - Lippert R Série Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DISPOSAL OF ELECTRIC AND ELECTRONIC PARTS:
The electric and electronic equipments are defined "electric and electronic equipments waste" or "RAEE" according to article
6, paragraph 1, letter a) of the decree-law 05/02/1997 nr. 22 and its following amendments, including all the parts, subsets
and consumable materials which make up the product; an inadequate use of these equipments or its components can use
serious damages to the environment and to human health due to the dangerous substances they contain.
According to the decree-law 151/2005 it is compulsory not to dispose of RAEEs as solid waste and to collect them se-
lectively; otherwise the sanctions provided for in case of illegal waste disposal will be applied, as per the decree-law of
05/02/1997 nr. 22.
The public administration or individuals (voluntarily) establish RAEE collection systems and RAEE collection centres, such
as areas, premises and structures for selective waste collection and temporary storage of RAEE, which users can directly
contact.
Private customers have also the possibility to return the equipment to the retailer when purchasing a new one.
The symbol indicating the selective waste collection of electric and electronic equipments (AEE)
is a crossed wheeled dustbin: the symbol is printed in a visible, readable and indelible way directly
on the product..
12.0 AVVERTENZE DI CARATTERE GENERALE SULLE NORME DI SICUREZZA
All of the hazardous elements, such as shafts, pulleys, chains, crown gears, etc., have been isolated and protected, within their struc-
tural limitations, by suitable protective panels.
The above-mentioned panels, which provide efficient separation between hazardous elements and man, must not be re-
moved, even temporarily, and any tampering with them during the working life of the step must be prevented.
Should it become necessary to remove the protective panels, the operator must in any case observe the safety precautions designed
to safeguard him and any other person who may be within the radius of action of the step.
In any case, the protective panels should be restored as soon as maintenance has been completed..
In particular, the following should be kept in mind during maintenance:
Prior to starting work ensure that the vehicle is parked in conditions of certain stability.
All operations must be carried out with the equipment stopped and only after having switched off the power.
LCI Italy gives their customers a 24-months warranty on the different components of the step. The 24-months validity of
the warranty starts from the date on which the customer receives the good.
The warranty does not cover:
- Footsteps, as they are considered wear and tear parts;
- Electronic control units, in case LCI Italy detects an incorrect connection to the system;
- Damaged or partially disassembled parts;
- Repair and/or replacement of the steps that were not used properly or not in compliance with the guidelines provided
in the specifi c handbook;
- Repairs and/or replacements carried out by some person other than LCI Italy and/or not authorized by LCI Italy;
- Any indirect damage
- Damages due to non-use of the vehicle, if they concern – specifi cally - parts that are not to be considered vital to full
enjoy ment and use of the good and because steps have emergency movement devices
- Any repair or operation that is not carried out at LCI Italy's premises.
The warranty covers:
- Repair and/or replacement due to manufacturing failures or defects, recognized by LCI Italy after appropriate testing and
check on the claimed product(s) at the premises of the company;
- Repair and/or replacement due to reasons attributable to LCI Italy and regarded as necessary at LCI Italy's exclusive
judgment;
- Any transport costs paid to return the goods in case of acknowledgement by LCI Italy of the claimed failure or defect;
- Transport costs paid to return the goods to LCI Italy are covered for a maximum amount of EUR 20,00 (twnty/00) for each
delivery.
Manufacturing defects:
The customer must check the goods or let the goods be checked as soon as possible, in accordance with art. 38 of the
Vienna Convention. In case the goods have defects, in order not to lose the warranty, the customer must communicate the
alleged defects to LCI Italy - describing the kind of defect - no later than 10 days after receiving the goods.
13.0 GENERAL TERMS OF GUARANTEE
19

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières