Cleaning And Maintenance - AEG HSM/R 5556 Mode D'emploi

Finish Operation
Slide button (7) towards the "0" icon.

Cleaning and Maintenance

• Regular cleaning and maintenance ensures optimum results and
long lifetime.
• Turn the unit off and disconnect from mains power supply, if
necessary.
Warning:
► Do not submerge the unit in water.
Caution:
► Do not use a wire brush or other abrasives.
► Do not use sharp or abrasive cleaning agents.
• Use the cleaning brush to remove remaining hair after use.
• Remove the attachment comb (4).
Attach/Remove Clipper Head
The clipper head is locked to the casing.
• To unlock the clipper head press with both
thumbs from the top on the cutting area.
• Regularly apply 1 - 2 drops acid-free oil to the
clipper head.
• Replace the clipper head after cleaning first at the bottom and
then at the cutting area.
• Clean the casing with a slightly damp cloth, if necessary.
• Replace the attachment comb.
Noise emission
The workplace-related emission value is less than 70 dB(A).
English
53