Imetec TERMOFORO E0801 Instructions D'utilisation page 20

Masquer les pouces Voir aussi pour TERMOFORO E0801:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
• Remove the heating pad from the tumble dryer at the end of the drying
cycle and hang it out to dry completely.
• Do not use the heating pad before it is completely dry.
EN
AIR DRYING
• Lay the heating pad flat on a clothes horse until completely dry.
WARNING! Dry the appliance flat without using pegs to
avoid damaging it. Leave it to dry, laid out flat on a
clothes horse, not in direct sunlight.
Do not iron the heating pad.
Store this appliance as follows when not used:
• Wait for the heating pad to be completely dry if previously washed.
• It is recommended to place the heating pad in the package provided
upon purchase for better storage.
• When storing the appliance, allow it to cool down before folding.
• Store the heating pad in a dry place.
Examine the appliance and its supply cord frequently for signs of
wear or damage. lf there are such signs or in the case of malfunction,
contact an authorised technical service centre.
The packaging of the appliance is made of recyclable materials. Dispose of the packaging
in accordance with the environmental protection regulations.
Pursuant to Directive 2012/19/EU on waste electrical and electronic equipment (WEEE),
the crossed bin symbol on the appliance or its packaging indicates that the appliance must
be disposed of separately from other waste at the end of its useful life.
The user must therefore take the appliance to an appropriate recycling centre for electrical
and electronic equipment. Alternatively, instead of handling the disposal, the user can hand over
the appliance to the retailer when a new, equivalent one is purchased. The user can hand over
17
STORING THE HEATING PAD
DISPOSAL

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Termoforo e0805Termoforo e0803Termoforo e0808

Table des Matières