Imetec TERMOFORO E0801 Instructions D'utilisation page 18

operation refer to the instructions in the relevant chapter.
• DO NOT use this appliance to warm animals.
• DO NOT fall asleep if the appliance is on.
EN
• See the external packaging for the characteristics of the
appliance.
• Insert the control unit connector (5) into the heating pad connector (6)
to connect the control to the heating pad.
• Insert the plug in the mains socket.
• Place the heating pad on the part of the body that is to be heated.
SWITCHING THE APPLIANCE ON AND SELECTING THE
TEMPERATURE
The control unit has 5 temperature settings:
4-5: pre-heat settings
1-3: settings for continuous use
• Press the ON/OFF selector (4) to switch the heating pad on.
• The temperature will be automatically set to level 5 and the relevant
temperature led (1) will light up on the control unit.
• Select the desired temperature (from 1 to 5) by pressing the
temperature selector (3) until the led (1) number lights up.
For continuous use, set the control unit to temperature
levels 1 to 3 only.
than recommended for continuous use.
If the appliance is used on with the control set to a
higher temperature the user may suffer skin burns or
heat stroke.
15
DO NOT set the control unit to a higher temperature
USE