Connecting This Unit To Your Computer - Sony MSAC-US20 Mode D'emploi

Connecting this unit to your computer

PNote
Be sure to install the supplied software before you connect this unit to your
computer. Restart your computer following installation.
1
Firmly insert the Mini-B connector of the USB cable into the
USB jack on this unit as far as it will go.
2
Plug the A connector of the USB cable into a USB jack on your
computer.
• The "Found New Hardware Wizard" starts up and installation of
the driver begins. Depending on the OS, the driver installation may
take place automatically.
• When using a computer with multiple USB jacks, do not connect
other devices, with the exception of a standard mouse and keyboard,
to USB jacks at the same time as this unit. When using a desktop
computer, use a USB jack on the main unit of the computer.
3
Select "Install software automatically [Recommended]", and
click [Next].
4
When you click [Finish], installation is completed.
You can now start using this unit.
8-GB