How To Use; Installing The Software On Your Computer - Sony MSAC-US20 Mode D'emploi

BHow to Use
Installing the software on your
computer
PNote
Be sure to install the supplied software before you connect this unit to your
computer.
Do not perform the installation while this unit is connected to your computer.
Restart your computer when installation is completed, and then connect this
unit to your computer.
Installing the device driver on your computer
PNote
Simultaneously with the installation of the device driver, the "Memory Stick
Formatter" and the operating instructions (PDF file) are also installed on your
computer.
1
Turn on your computer.
At this point, do not connect this unit to your computer.
Close all running applications.
To install the device driver when you are using Windows 2000 or XP,
you must log on with Administrator rights.
2
Insert the supplied CD-ROM (MSAC-US20 DISK1 or MSAC-US20
DISK2) into the CD-ROM drive on your computer.
The Installer launcher starts up automatically.
To install a driver, click the [Driver] button in the menu.
3
Carefully read the License Agreement, and then click the
[Agree] button.
When you click the [Agree] button, installation of the driver starts.
4
After this, install the driver and the "Memory Stick Formatter"
as prompted on the screen.
To use "Memory Stick Formatter", select [Start] – [Programs] –
[Memory Stick Utility] – [Memory Stick Formatter].
5-GB