Getting Started - Horizon Fitness ELITE R7 Guide D'utilisation

SET UP XID ACCOUNT FOR VIA FIT
Creating an xID account will allow you to save and share workout data using the Via Fit Wi-Fi. Up to four users can be
saved on a machine. This process is the first step in connecting your equipment. It must be done from a computer, tablet,
or mobile device.
1) Visit the web site: www.ViaFitness.com
2) Once at the web site, select the CONNECT YOUR EQUIPMENT option on the top menu bar.
3) The first step in connecting your equipment will to be creating your xID account. This will be your login to Via Fit.
4) Enter your phone number or another easy-to-remember 10-14 digit number. This will be your account number.
5) Fill in your profile information to finish the xID account set up process. You will be asked to provide an email address
not associated with any other xID account. Check your email after the set-up process for a link to validate your
account.
CONNECT WI-FI
Once you have created your xID account, you will be able to move on to activating the Wi-Fi on your equipment. Reminder,
this requires you to use your computer, tablet, or mobile device that is connected to the internet.
1) Press and hold for 3-5 seconds until you see the message ACTIVATED on your screen.
2) On your computer or other device, go to your Wi-Fi settings. You should select the network with your model name.
Doing this enables you to connect your equipment to your wireless network.
3) A new window will pop up with the list of wireless networks your equipment can see. Select your home Wi-Fi network
and connect.
4) The remaining step is to reconnect your computer or other device back to your Wi-Fi network. Go to your settings again
and connect as you normally would.
Congratulations! You are now connected and ready to get started.
8
HZ14_OG_Elite_R7_U7_Rev1_5.indd 8-9
CONNECTIVITY
™

GETTING STARTED

1) Check to make sure no objects are nearby that will hinder the movement of the bike.
2) Plug in the power cord.
3) Select your xID account, User, Guest, or Edit a User using
4) When you log in for the first time as User 1-4, you will be prompted to enter your xID information.
a) Enter your xID account number using
input to move to the next digit. After the final input, press
b) Enter your passcode using to select the numbers. Press
digit. After the final input, press .
c) If you key the incorrect number at any point while entering your xID or passcode, press and hold
seconds to clear the selection and begin again.
A) QUICK START
Simply press to begin working out. Time will count up from 0:00.
The resistance level will default to level 1.
B) SELECT A PROGRAM
1) Select a PROGRAM using and press
2) Set workout program information using
3) Press to begin workout.
NOTE: You can adjust the resistance level during your workout.
C) FINISHING YOUR WORKOUT
When your workout is complete, your workout information will stay displayed on the console for 30 seconds and then
is automatically saved to the user profile if xID Terms and Conditions were accepted.
TO CLEAR CURRENT SELECTION
To clear the current program selection or screen, press and hold
and press .
and press to select the numbers. Press after each
.
after each input to move to the next
for 3-5
.
and press after each selection.
for 3 seconds.
9
9/4/14 4:59 PM