Digital Works ReZAP Battery Doctor Guide D'utilisation Et D'entretien page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• After batteries are charged, test them individually in the battery tester slot
before use. Only batteries that show the same voltage strength should be
used together. For alkaline batteries, use those that show 3 to 4 Green
lights together and for rechargeable batteries, use those that show 3
Green lights together. Mixing weak or partially charged with fully charged
batteries will result in your device not functioning properly or not
powering on at all. Also remember not to mix different battery types
together (eg: Alkaline with rechargeable).
• For best results, charged alkaline cells should be promptly removed
within a few hours after charging is completed. Continuous connection to
the metal plates (whether the charger is ON or OFF) for a prolonged
period will shorten battery life. Recharged alkaline cells should be used
as soon as possible as they are not suitable for long term storage due to
their rapid self discharge.
• Different brands of alkaline cells may give different results, depending on
the chemical composition used in making the product. Do not be
surprised to find that some top brand alkaline cells may yield fewer cycle
lives than less well-known brands. Try different brands of batteries and
decide for yourself the brands that work best in your applications and in
the REZAP charger.
• The charger has four main slots with four corresponding green lights.
Only put one battery per slot. Do not try to put one battery on top of
another in a single slot.
• Please do not connect the 6V cable clips to any other types of batteries
except 6V dolphin/lantern batteries as recommended.
• The 9V and 6V batteries occupy the first and forth slots respectively.
When a 9V or a 6V battery is being charged, do not place another battery
in the first (far left) or the forth (far right) slot as they may conflict with one
another.
• When charging 9V or 6V battery, leave battery in charger for an
additional 2 to 3 hours after the green light appears to absorb additional
trickle charge power.
8

Publicité

Table des Matières
loading

Table des Matières